T/A 96 Evaporator Specifications

General
-Ducted air distribution
-Weight - 103 pounds (47 kg)
-Box Size - 45" x 22" x 16"
                   (1,143 x 559 x 406 cm)
-Cube - 9.2 ft³ (.26 m³)

Cooling Capacity
-Maximum capacity - 53,000 BTU/HR
                   (13,303 Kcal/HR)

Cover/ Ducting
 -Vinyl covered aluminum ducting with
                   upholstered head pad
--Multi-directional louvers
-Washable/reusable filter
-(2) 1/2 in. ID drain lines

Blower Assembly
-(4) 4.5 in. diameter blower wheels
-Amperage draw 21.5 A @ 13.5 vdc.
-Total CFM 1,600 ft.³/min (2,720
                    m³/HR) @ 0 static
-Double shafted, single speed,
                    permanent magnet motor

Evaporator Coil
-Face area 360 in.² (2,323 cm.²)
-Aluminum fins magnetically expanded onto 3/8" copper tubes, 4 rows deep by 10 high
-Fins: .006" thick, 12 per inch, corrugated surface, rippled edge
-Multi-tube distributor

Electrical
-Coded, stranded copper, Cross Link
-High and low pressure switches

Expansion Valve
-Commercial grade minimum 3 ton
                   externally equalized
                   thermostatic type

Warranty
-(2) year, unlimited mileage limited warranty within the Continental US and Canada*

Capacities listed vary depending upon the rating conditions used.

Specifications subject to change without notice.

Note:  All measurements in standard (metric)

*Terms of Trans/Air's domestic and export warranty policies are available upon request.

Contact TRANS/AIR for more information.

Application
The T/A 96  has a maximum rating of 53,000 BTU/H and is designed specifically for heavy duty ducted systems.  Typical applications are single mounted, in cut-a-way vehicles up to 23 ft. in length or dual side mounted evaporators (T/A 97) in conventional or rail chassis up to 40' in length.  With Trans/Air's Total Systems Approach, the T/A 96 evaporator can be used in conjunction with a wide variety of compressor/condensor options for a tailored system recommendation.

The T/A 96 evaporator comes standard with washable filter and padded head cover that can be upholstered to match the interior of the vehicle.  Corner ducting is constructed of neutral colored vinyl coated aluminum to blend well with all interiors.  Multi-directional louvers supply full independent air flow throughout the cabin.  High efficiency over sized coils are standard for maximum cooling output and include a commercial grade externally equalized, thermostatically controlled 3 ton expansion valve.

Blower assemblies come equipped with larger blower wheels for greater CFM and motors utilize custom wound armatures for lower amperage draw and greater efficiency.  Blower motors have permanent magnets and sealed bearings for longer life and fewer maintenance requirements.

Trans/Air controls provide precise regulation of airflow and temperature.  All wiring harnesses include coded wiring and are properly gauged for the system amperage load to minimize voltage drop and increase efficiency.  High and low pressure switches and a freeze stat are used to protect the integrity of the system.

Available Options
Ducting -
The T/A 96 comes with a choice of 10" x 10" or 10" x 12"
vinyl covered aluminum ducts depending on installation
requirements.

4 Ton Expansion Valve -
A 4 ton expansion valve is available for use with high
capacity #16 suction line package.