T/A 70 Evaporator Specifications

General
-Freeblow air distribution
-Weight - 45 pounds (20 kg)
-Box Size - 34" x 21" x 13"
                   (851 x 533 x 330 mm)
-Cube - 5.4 ft.³ (.15 m³)

Cooling Capacity
-Maximum capacity - 30,000 BTU/HR
                   (7,530 Kcal/HR)

Cover
-ABS Cover
-Integral drain pan
-3 multi-directional louvers
-Washable/reusable filter
-1 -1/2" ID drain lines

Blower Assembly
-(2) -4.5" diameter blower wheels
-Amperage draw 11 @ 13.5 vdc.
-Total 800 CFM (1,360 m³/HR) @ 0 static
-Double shafted, single speed motor,
                  permanent magnet motor

Evaporator Coil
-Face area 168 ft² (1,084 cm.²)
-Aluminum fins magnetically expanded onto 3/8" copper tubes, 4 rows deep by
                  10 high
-Fins: .006" thick, 12 per inch,
                  corrugated surface, rippled
                  edge
-Multi-tube distributor

Electrical
-Coded, stranded copper, Cross Link
-Low and high pressure switches

Expansion Valve
-Commercial grade block type

Warranty
-(2) year, unlimited mileage limited warranty within the Continental US and Canada*

Capacities listed vary depending upon the rating conditions used.

Specifications subject to change without notice.

Note:  All measurements in standard (metric)

*Terms of Trans/Air's domestic and export warranty policies are available upon request.

Contact TRANS/AIR for more information.

Application
The T/A 70 has a maximum rating of 30,000 BTU/H and is engineered for van conversions and cut-a-way vehicles up to 15' in length.  The T/A 70 can be used in tandem or in conjunction with other Trans/Air evaporators in medium body sizes up to 33' in length.  With Trans/Air's Total Systems approach, the T/A 70 evaporator can be used with a wide variety of condenser/compressor options for a tailored system recommendation.

The cover, with integral drain pan and washable filter, is made of durable ABS plastic.  Covers are available in white, beige and gray to blend in well with all coach interiors.  Multi-directional louvers provide even cooling and air distribution throughout the vehicle interior.  High efficiency over sized coils are standard for maximum cooling output and include a commercial grade block type expansion valve.

Blower assemblies come equipped with larger blower wheels for greater CFM and motors utilize custom wound armatures for lower amperage draw and greater efficiency.  Blower motors have sealed bearings for longer life and fewer maintenance requirements.

Trans/Air controls provide precise regulation of airflow and temperature.  All wiring harnesses include coded wiring and are properly gauged for the system amperage load to minimize voltage drop and increase efficiency.  High and low pressure switches are used to protect in integrity of the system.