SC-3 Condenser Specifications

General
-Skirt Mounted
-92% Flow-through aluminum grill

Fan Motor Assembly
-Low profile surface mount
-Closed permanent magnet motor with
                  ball bearings
-Fan and shroud constructed of glass
                  filled nylon plastic

Coil
-Aluminum fins magnetically expanded onto 3/8" copper tubes, 4 rows deep by 10 high
-Fins: .008" thick, 12 per inch, corrugated surface, straight edge
-Slant design

Filter/Drier
-30 in³

Sight Gauge
-Plastic cover
-Moisture indicator
-Visable from outside of bus

Warranty
-(2) year, unlimited mileage limited warranty within the Continental US and Canada*

Capacities listed vary depending upon the rating conditions used.

Specifications subject to change without notice.

Note:  All measurements in standard (metric)

*Terms of Trans/Air's domestic and export warranty policies are available upon request.

Contact TRANS/AIR for more information.

A in (mm) 39.25 (996.950) B in (mm) 36.37 (923.80) C in (mm) 14.65 (372.11) D in (mm) 11.81 (299.97) E in (mm) 37.75 (958.85) F in (mm) 8.00 (203.20) G in (mm) 4.00 (101.60) Coil Face Area in in2 cm2 513 (3,315) No. of Fans 2 Fan Diameter in (mm) 14 (355.6) Amperage @ Vdc 20.4 @ 12 10.2 @ 12 Air Flow Total ft3/min (m3/h) 2,844 (4,830) Heat Rejection BTU/H (Kcal/H) 51,000 (12,801) Weight lb. (kg) 60 (27.2) Box Dimensions in (mm) 40 x 14 x 15 (1,016 x 356 x 381) Cube ft3 (m3) 4.86 (.14)