SC-4 Condenser Specifications

General
-Skirt Mounted
-92% Flow-through aluminum grill

Fan Motor Assembly
-Low profile surface mount
-Closed permanent magnet motor with
                  ball bearings
-Fan and shroud constructed of glass
                  filled nylon plastic

Coil
-Aluminum fins magnetically expanded onto 3/8" copper tubes, 4 rows deep by 10 high
-Fins: .008" thick, 12 per inch, corrugated surface, straight edge
-Slant design

Filter/Drier
-30 in³

Sight Gauge
-Plastic cover
-Moisture indicator
-Visable from outside of bus

Warranty
-(2) year, unlimited mileage limited warranty within the Continental US and Canada*

Capacities listed vary depending upon the rating conditions used.

Specifications subject to change without notice.

Note:  All measurements in standard (metric)

*Terms of Trans/Air's domestic and export warranty policies are available upon request.

Contact TRANS/AIR for more information.

A in (mm) 53.25 (1,352.55) B in (mm) 50.37 (1,279.40) C in (mm) 14.65 (372.11) D in (mm) 11.81 (299.97) E in (mm) 51.75 (1,314.45) F in (mm) 8.00 (203.20) G in (mm) 4.00 (101.60) Coil Face Area in in2 cm2 737 (4,760) No. of Fans 3 Fan Diameter in (mm) 14 (355.6) Amperage @ Vdc 30.60 @ 12 15.3 @ 12 Air Flow Total ft3/min (m3/h) 4,266 (7,250) Heat Rejection BTU/H (Kcal/H) 78,000 (19,578) Weight lb. (kg) 84 (38.1) Box Dimensions in (mm) 55 x 15.5 x 18 (1,397 x 394 x 457) Cube ft3 (m3) 8.88 (.25)