SMC2S Condenser Specifications

General
-Skirt Mounted
-92% Flow-through aluminum grill

Fan Motor Assembly
-Low profile surface mount
-Closed permanent magnet motor with
                  ball bearings
-Fan and shroud constructed of glass
                  filled nylon plastic

Coil
-Aluminum fins magnetically expanded onto 3/8" copper tubes, 4 rows deep by 10 high
-Fins: .008" thick, 12 per inch, corrugated surface, straight edge
-Slant design

Filter/Drier
-30 in³

Sight Gauge
-Plastic cover
-Moisture indicator
-Visable from outside of bus

Warranty
-(2) year, unlimited mileage limited warranty within the Continental US and Canada*

Capacities listed vary depending upon the rating conditions used.

Specifications subject to change without notice.

Note:  All measurements in standard (metric)

*Terms of Trans/Air's domestic and export warranty policies are available upon request.

Contact TRANS/AIR for more information.

A in (mm) 39.25 (996.950) B in (mm) 36.37 (923.80) C in (mm) 10.33 (262.38) D in (mm) 11.50 (292.10) E in (mm) 37.75 (958.85) F in (mm) 8.00 (203.20) G in (mm) 4.00 (101.60) Coil Face Area in in2 cm2 353 (1,279) No. of Fans 2 Fan Diameter in (mm) 10 (254) Amperage @ Vdc 14.4 @ 12 7.2 @ 24 Air Flow Total ft3/min (m3/h) 1,590 (2,700) Heat Rejection BTU/H (Kcal/H) 40,000 (10,040) Weight lb. (kg) 50 (22.7) Box Dimensions in (mm) 40 x 13 x 13 (1,016 x 330 x 330) Cube ft3 (m3) 3.91 (.11)