SMC2S Stacked Condenser Specifications

General
-Skirt Mounted
-92% Flow-through aluminum grill

Fan Motor Assembly
-Low profile surface mount
-Closed permanent magnet motor with
                  ball bearings
-Fan and shroud constructed of glass
                  filled nylon plastic

Coil
-Aluminum fins magnetically expanded onto 3/8" copper tubes, 4 rows deep by 10 high
-Fins: .008" thick, 12 per inch, corrugated surface, straight edge
-Slant design

Filter/Drier
-30 in³

Sight Gauge
-Plastic cover
-Moisture indicator
-Visable from outside of bus

Warranty
-(2) year, unlimited mileage limited warranty within the Continental US and Canada*

Capacities listed vary depending upon the rating conditions used.

Specifications subject to change without notice.

Note:  All measurements in standard (metric)

*Terms of Trans/Air's domestic and export warranty policies are available upon request.

Contact TRANS/AIR for more information.

A in (mm) 39.25 (996.950) B in (mm) 36.37 (923.80) C in (mm) 20.67 (525.02) D in (mm) 19.00 (482.60) E in (mm) 37.75 (958.85) F in (mm) 8.00 (393.80) G in (mm) 4.00 (101.60) Coil Face Area in in2 cm2 706 (4,558) No. of Fans 4 Fan Diameter in (mm) 10 (254) Amperage @ Vdc 28.8 @ 12 14.4 @ 12 Air Flow Total ft3/min (m3/h) 3,180 (5,400) Heat Rejection BTU/H (Kcal/H) 80,000 (20,080) Weight lb. (kg) 105 (47.6) Box Dimensions in (mm) 56.5 x 24 x 22.5 (1,435 x 610 x 572) Cube ft3 (m3) 17.65 (.50)